Datasheet

4
Device Selection Guide at Junction Temperature T
j
= 25°C
Module
Type Color No. of LEDs Part Number
Luminous Flux, Φv
[1,2,3,4]
(lm)
Test
Current
Min. Typ. Max. (mA) Dice Technology
Strip
Cool White
3 ADJD-WM00
43.0 60.0 73.0 350 InGaN
3 ADJD-WM01
4 ADJD-WM10
6 ADJD-WM21
9 ADJD-WM30
12 ADJD-WM40
Warm White
3 ADJD-YM00
43.0 50.0 73.0 350 InGaN
3 ADJD-YM01
4 ADJD-YM10
6 ADJD-YM21
9 ADJD-YM30
12 ADJD-YM40
Round Cool White 7 ADJD-WMR0
43.0 60.0 73.0 350 InGaN
Ring 8 ADJD-WMR3
Round Warm White 7 ADJD-YMR0
43.0 50.0 73.0 350 InGaN
Ring 8 ADJD-YMR3
Notes:
1. Φ
V
is the total luminous ux output as measured with an integrating sphere at 25ms mono pulse condition.
2. Φ
V
is referring to a single unit of LED at 350mA.
3. Φ
V
data are only applicable for ASMT-Mx00 component level device only.
4. Flux tolerance is ±10 %.
Part Numbering System
Table 1.
xx No. of LEDs Module Type Resistor Driving Condition
00 3 Strip No Current
01 3 Strip Yes Voltage
10 4 Strip No Current
21 6 Strip Yes Voltage
30 9 Strip No Current
40 12 Strip No Current
R0 7 Round No Current
R3 8 Ring No Current
ADJD- x M x x - N x
1
x
2
x
3
0
Color Bin Selection
Max Flux Bin Selection
Min Flux Bin Selection
Color
W - Cool White
Y - Warm White
Refer to Table 1