Datasheet

ManualsBrandsBROADCOM ManualsOptoelectronics & DisplaysPhototransistor-Optocoupler SO 16 Half-pitch Type (misc.) DC-PhotoTX-Coupler 4-Channel T/R

ACPL-227 / ACPL-247

DC Input Multi-Channel Half-Pitch

Phototransistor Optocoupler

Data Sheet

Description

The ACPL-227 is a DC-input dual channel half-pitch

phototransistor optocoupler which contains two light

emitting diodes optically coupled to two separate photo-

transistors. It is packaged in an 8-pin SO package.

Likewise, the ACPL-247 is a DC-input quad channel half-

pitch phototransistor optocoupler which contains four

light emitting diodes optically coupled to four separate

phototransistors. It is packaged in a 16-pin SO package.

For both devices, the input-output isolation voltage is

rated at 3,000 Vrms. Response time, tr, is 2μs typically,

while minimum CTR is 50% at input current of 5 mA.

Features

• Current transfer ratio (CTR: 50% (min) at I

= 5mA, V

= 5V)

• High input-output isolation voltage (V

ISO

= 3,000V

RMS

)

• Non-saturated Response time (t

: 2µs (typ) at V

10V, I

= 2mA, R

= 100Ω)

• SO package

• CMR 10kV/μs (typical)

• Safety and regulatory approvals

- UL

- CSA

- IEC/EN/DIN EN 60747-5-2

• Options available:

– CTR Ranks 0, B & C for ACPL-227 and Rank 0 only for

ACPL-247

Applications

• I/O Interface for Programmable controllers, computers.

• Sequence controllers

• System appliances, measuring instruments

• Signal transmission between circuits of dierent

potentials and impedances.

Lead (Pb) Free

RoHS 6 fully

compliant

RoHS 6 fully compliant options available;

-xxxE denotes a lead-free product

ACPL-227 pin layout

ACPL-247 pin layout

1 2 3 4

8 7 6 5

1 2 3 4

16 15 14 13

5 6 7 8

12 11 10 9

Pin 1, 3 Anode

Pin 2, 4 Cathode

Pin 5, 7 Emitter

Pin 6, 8 Collector

Pin 1, 3, 5, 7 Anode

Pin 2, 4, 6, 8 Cathode

Pin 9,11,13,15 Emitter

Pin 10,12,14,16 Collector

Summary of content (9 pages)

PAGE 1
ACPL-227 / ACPL-247 DC Input Multi-Channel Half-Pitch Phototransistor Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product Description Features The ACPL-227 is a DC-input dual channel half-pitch phototransistor optocoupler which contains two light emitting diodes optically coupled to two separate phototransistors. It is packaged in an 8-pin SO package.
PAGE 2
Ordering Information ACPL-2x7-xxxx is UL recognized at 3,000 Vrms for 1 minute per UL1577 and is approved under CSA Component Acceptance Notice #5, File CA 88324. RoHS Compliant Option Part number ACPL-227 ACPL-247 Rank ‘0’ 50%
PAGE 3
Package Outline Drawings ACPL-227 PACKAGE OUTLINE 1.27 ±0.25 0.050 ±0.010 LEAD FREE VDE option only 0.75 0.030 A227V YYWWA 2.00 ±0.20 0.079 ±0.008 5.20 ±0.30 0.205 ±0.012 5.30±0.3 [0.208 ±0.012] 0.20 ±0.05 0.008 ±0.002 RANK 0.75 0.030 0.12 ±0.10 0.005 ±0.004 PIN ONE 4.40 ±0.20 0.173 ±0.008 DATE CODE 0.7 ±0.2 [0.028 ±0.008] 0.40 ±0.10 0.016 ±0.004 7.00 ±0.40 0.276 ±0.016 DIMENSIONS IN MILLIMETERS [INCHES] ACPL-247 PACKAGE OUTLINE 1.27 ±0.25 0.050 ±0.
PAGE 4
Solder Reflow Temperature Profile Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision). Non-Halide Flux should be used.
PAGE 5
Electrical Specifications (DC) Over recommended ambient temperature at 25°C unless otherwise specified. Parameter Symbol Min. Typ. Max. Units Test Conditions Note Forward Voltage VF - 1.2 1.4 V IF = 20mA Fig.6 Reverse Current IR - - 10 μA VR = 5V Terminal Capacitance Ct - 30 - pF V = 0, f = 1MHz Collector Dark Current ICEO - - 100 nA VCE = 48V, IF = 0 mA Collector-Emitter Breakdown Voltage BVCEO 80 - - V IC = 0.
PAGE 6
0 160 40 ACPL-227 ACPL-247 30 20 10 0 -25 -5 15 35 55 75 Ambient Temperature Ta (ºC) 95 ACPL-227 100 80 ACPL-247 60 40 20 0 -25 0 25 100 125 100 Forward Current, IF(mA) 1000 100 0.0010 0.0100 0.1000 10 1 0.4 1.0000 -30ºC 0ºC 25ºC 50ºC 75ºC Ta = 110ºC 0.6 0.8 Duty Ratio 1.0 1.2 1.4 1.6 1.8 2.0 Forward Voltage, VF(V) Figure 6. Forward Current vs. Forward Voltage Figure 5. Pulse Forward Current vs.
PAGE 7
50 50 50mA 40 45 30mA Collector Currrent, Ic( mA) Collector Current, Ic(mA) Ta = 25ºC 20mA 30 PC(max)=100mW ACPL-247 20 PC(max)=150mW ACPL-227 10mA 10 IF=5mA 40 50mA 35 30 30mA 25 20 20mA 15 10mA 5mA 10 5 0 0 5 Collector-Emitter Voltage, VCE(V) 0 10 0 0.5 Collector-Emitter Voltage, VCE(V) IF = 2mA 1 Figure 10. Collector Current vs. Small Collector-Emitter Voltage Figure 9. Collector Current vs. Collector-Emitter Voltage 0.
PAGE 8
100 1000 1mA IF = 0.5mA 0.1 -25 0 25 50 Ambient Temperature, Ta (oC) 75 Switching time, t (μs) tS tON 1 IF = 16mA VCC = 5V R = 1.9kΩ 0.1 L -20 0 20 40 60 Ambient Temperature, Ta (ºC) t ON 1 Ta = 25ºC VCC = 5V RL = 1.9kΩ 0.1 1 10 Load Resistance, RL(kΩ) 100 Figure 16. Switching Time vs. Load Resistance tOFF 10 TS 10 100 Figure 15. Collector Current vs. Ambient Temperature 100 t OFF 80 100 Figure 17. Switching Time vs. Ambient Temperature 5 Ta = 25ºC 4 3 2 1 0 0.
PAGE 9
For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2005-2008 Avago Technologies Limited. All rights reserved.