Specifications

e-mail: [e-mail] voice: 360.854.9559 fax: [phone]
8
ACS 16.2 Installation and Operation Manual
INSTALLATION
INSTALLATION GUIDELINES
Inspection
Please examine your ACS 16.2 carefully for any damage that may have been sus-
tained during shipping. If any is noted, please notify the shipper immediately and
retain the packaging for inspection by the shipper. The package contains the ACS
16.2, universal input, multi-voltage DC switching power supply w/ IEC domestic
AC power cord, reversed modular serial cable with the “S9” 9-pin D-Sub adapter.
Manuals are downloadable from our web site.
Setting “OPTIONS” Dipswitches
The ACS 16.2 is equipped with an 8-position “OPTIONS” dipswitch. The dipswitch
specifies 2-bit unit ID, baud, audio modes (mix, interlock, overlap), and other features
listed below. Access to this switch is on the rear panel. Follow the description below.
“OPTIONS” Dipswitch Functions
Switch Default Function
Number Setting
1 OFF Binary address 1 (Default ID = 0)
2 OFF Binary address 2
3 OFF Baud rate (Default) OFF = 9600 / ON = 38400)
4 OFF Stereo Audio Switching (Default = Overlap)
5 OFF Stereo Audio Switching (Default = Overlap)
6 OFF Open Collector and Relay configuration (Default = Burst)
7 OFF Power up modes (Default = Last source selected)
8 ON Remote Control / “PIP” GPI/Triggers (Default)
Address (Unit ID) DIP Switches
Switch 1 Switch 2 Mode
OFF OFF ID = 0
ON OFF ID = 1
OFF ON ID = 2
ON ON ID = 3
Baud Rate DIP Switch
Switch 3 Mode
OFF 9600
ON 38400
Audio Switch Mode DIP Switches
Switch 4 Switch 5 Mode
OFF OFF Overlap
ON OFF Interlock
OFF ON Interlock
ON ON MIX