Specifications

e-mail: [e-mail] voice: 360.854.9559 fax: [phone]
19
ACS 16.2 Installation and Operation Manual
SPECIFICATIONS
SPECIFICATIONS
Input Levels: Max + 27 dBu, balanced, bridging. 20k Ω , depending on
input trimmer position.
Output Levels: Two stereo balanced outputs, +24 dBm. @ 600 Ω . /
+27dbu @ 10KΩ .
Headphone output, 4.7 Ω . 100mw.
System Gain: 10 dB max.
Frequency Response: * 20 to 20 kHz; +/- .0.25dB
Signal/Noise Ratio: * >85 dB nominal, weighted 20 to 22Khz, @ +27dBu.
Distortion: * Less than 0.01% THD @ +27dBu
IMD (250/7kHz): * Less than 0.01% IMD @ +27 dBu.
Crosstalk: * -80 dB @ 1khz / -55 dB @ 10 kHz from adjacent off channel.
Switching/Fade Method: Digitally controlled professional level analog switch arrays.
Digital fade/level control for inputs one and two for output
one.
Logic: Flash microprocessor / Non-volatile memory.
Operation Control: Front Panel – Knobs and momentary switches.
Remote/”PIP”(GPI/Triggers) - Momentary (40ms to 2.54
seconds response time, compatible with CMOS/TTL logic,
open collector or contact closures to ground.
Serial - Multi-drop RS-232, 9600 or 38.4K, 8,N, 1.
Status: Front Panel – 32 input routing LED indicators.
Remote - 16 Open collector outputs (<6vdc @ 100ma
each output. max). 8 - SPST Relays / Silence Sensors - 2
– SPDT relays.
RS-232 - Multi-drop RS-232, 9600 or 38.4K, 8,N,1.
Interfacing: Audio & Remote Control - Plug-in euro block screw termi-
nals. Accommodates 16 - 28 AWG wire. Mating connec-
tors supplied.
RS-232 Serial - RJ-11/6P4C reversed modular cable &
“S9” female 9-pin D-Sub adapter supplied.
OPTIONAL: USB-RS-232 Adapter cable and/or Ethernet
to serial interface.
Power: Universal AC (100 - 240 VAC, 46 - 63 Hz) w/IEC input,
multi-voltage (+5vdc & +/-15vdc) output switching power
supply. CE. Supplied with domestic IEC AC cord.
Mechanical: 19” x 1.75” x 10.0” (WHD)
Weight: 5 lbs, (unit and accessories).
WEBSITE:
Visit our web site for
product updates and
additional information.