Specifications

e-mail: [e-mail] voice: 360.854.9559 fax: [phone]
17
ACS 16.2 Installation and Operation Manual
OPERATION
Relay and Open Collector Commands
*uORrF - Unlatch output relay “r”
*uORrL - Latch output relay “r”
*uORrP - Pulse output relay “r”
*uOOooF - Unlatch open collector “oo” (Only works in NON-Remote mode)
*uOOooL - Latch open collector “oo” (Only works in NON-Remote mode)
*uOOooP - Pulse open collector “oo” (Only works in NON-Remote mode)
Audio Switch Control Commands
*uiio - Apply input “ii” to output “o”
*uiiA - Apply input “ii” to ALL outputs
*uiiEott - Start overlap - Apply input ii to output o. After tt tenths of a second,
remove all other inputs from output o.
NOTE: Only one at a time can be pending per output. Max time 9.9 seconds
*uE - End overlap if in overlap mode. This applies to all outputs that have changed
since the last “end overlap” command was issued.
*uiiMA - Mute input “ii” for all outputs
*uiiMo - Mute input “ii” for output “o”
*uMo - Mute output “o”
*uMA - Mute all outputs
*uB,a,a,a,a,a,a,a,a,a,a,a,a,a,a,a,a - Sets inputs, ignoring mode:
NOTE: Input commands MUST be in CAPS.
- A = All “OUTPUTS” OFF
- B = Output 1
- C = Output 2
- D = Outputs 1 + 2
Example: *0B,B,C,D,A,A,A,A,A,A,A,A,A,A,A,A,A
(Input 1 to output 1, Input 2 to output 2, Input 3 to both outputs, all other inputs are OFF.)
WEBSITE:
Visit our web site for
product updates and
additional information.