User`s guide

160 Chapter 10: Resource Panel

• AlwaysUseCropTool: Enables the user to always use the crop tool when an

image is added to the template.

• DestHeight and DestWidth: When set to values greater than 0 (zero), it will

enable the crop tool. The parameters set a fixed height and width for the

crop tool. Using this setting will force the user to use the configured height

and width, and the aspect. Meaning, if the selection is greater than then

actual height and width parameters, the image will be scaled to fit, allowing

the user to select a greater area, and conversely.

4. Select one or several image sources.

• ImageSources: Sets one or multiple image source locations. Valid sources

for the crop tool are isDataBase, isFileOpen and isPaste.

5. Save the template.

To crop an image

Note: This procedure requires that the template’s image component use the

ImageSources.isPaste parameter.

1. Open a template or a data element.

2. Search for and copy an image (e.g. web-based systems or file shares).

3. Right-click the image icon and from the appearing context menu select Paste

... .

4. Adjust the anchored frame and/or rotation of the image, and click the Save

(CTRL+S) button on the toolbar.