User`s guide

Chapter 8: Main Menu 133
To post render a scene
1. Open a data element.
2. Open the Post Rendering window.
3. Set the output parameters.
4. Click the record button.
To setup a render device for Viz 2.x
1. Start Viz Engine’s configuration tool Viz Config, and specify a render device
under the Device Manager section.
2.
Optional: Set a new destination directory for the files.
Note: For more information about how to configure post rendering devices, see the
Viz Artist 2.x User’s Guide .
To setup a render device for Viz 3.x
• Rendering in Viz 3.x is automatically configured.
Note: For more information about how to use the Device Manager in Viz Artist, see
the Viz Artist 3.x User’s Guide .
8.4.10 TC Monitor
Figure 51: TC Monitor
Selecting TimeCode (TC) monitor on the Tools menu opens the TC monitor
window. TC monitor monitors the time code and the video server channels; hence,
it will only work if the system is configured to be integrated with a video server.
The VCP client uses the Multiport Video Control Protocol (MVCP) to communicate
with a translator (Xlator) which again communicates with the video server.
For more information on supported video server setups, please Contact Vizrt.
• Next: Shows the next clip to be played.
• Location: Shows current location (time) in the clip (for example 00:10:01). This
time code increases when playing the clip (see, Remaining).
• Unit: Shows the video channel name.
• Overridden: If the user checks this box, it is possible to cue a new clip on the
same unit even though the tally is high (channel is currently in use/on air).