Operator`s manual

61
MicroSYNC Configuration Bytes
There are two bytes that carry all of the MicroSYNC Configuration information.
Configuration Byte #1 Configuration Byte #2
Bit 0 Vertical Blanking Bit 0 Genlock Mode
0 = Narrow 0 = Auto
1 = Wide 1 = Manual
Bit 1 Synchronizer Mode Bit 1 Manual Genlock Mode
0 = 4-Field 0 = External
1 = Frame 1 = Internal
Bit 2 Output Burst Bit 2 Comb Filter Mode
0 = Burst ON 0 = Normal
1 = Burst Off 1 = Monochrome
Bit 3 Manual Burst Bit 3 Input Lock Mode
0 = ON 0 = Auto Lock
1 = OFF 1 = Manual Lock
Bit 4 Process Bit 4 Manual Input Lock
0 = Process 0 = Burst Lock
1 = Bypass 1 = Manual Lock
Bit 5 Hot Switch Bit 5 Clamp Speed
0 = Enable 0 = Normal
1 = Disable 1 = Fast
Bit 6 Hot switch Mode Bit 6 Forced Black Mode
0 = Frame 0 = Normal
1 = Black 1 = Black
Bit 7 Black Clip Bit 7 Hot Frame Mode
0 = Enable 0 = Off
1 = Disable 1 = On