Operator`s manual

35
Personal TBC IV Connectors
FIGURE 4-3: Personal TBC IV I/O Connectors
S-VIDEO INPUT
Use this 4-pin connector to input S-Video (S-VHS or Hi8) to the TBC card. It is normally connected to the
S-Video output of a playback VCR using a standard 4-pin to 4-pin S-Video cable. Some JVC industrial type
S-VHS players use a 7-pin connector for their S-Video output. To interface with such machines, a 7-pin to
4-pin adapter cable is required.
MULTI FUNCTION I/O (DIN-9)
This jack connects the Personal TBC IV card to an available computer RS-232 serial port using the supplied DIN-9-M
to DB-25 cable. This feature is not used when the TBC IV is installed in an ES-2200T Expansion System.
The multi-function DIN-9 connector may be used as an advanced sync output by connecting the DPS 774-519 multi-
function cable (not included), and using the advanced sync BNC. The advanced sync signal can be fed to the EXT
SYNC input of a suitably equipped playback VCR. For more information on advanced sync, refer to Appendix C in
your TBC IV manual.
S-VIDEO OUTPUT
This 4-pin connector provides a time base corrected S-Video (S-VHS or Hi8) version of the video input signal.
NTSC VIDEO INPUT
This BNC connector is used to feed composite NTSC video to the TBC card. It is normally connected to the video
output of a playback VCR. It can also be connected to any composite NTSC source such as a TV tuner, laser disc
player, camera, etc.
S-VIDEO IN
MULTI DIN-9
S-VIDEO OUT
NTSC VIDEO IN
NTSC VIDEO OUT
GENLOCK IN