Operator`s manual

Chapter 4:

Video Connections

This section describes the inputs and outputs of the various cards that can be installed in the ES-2000 Expansion

system.

Personal TBC III Connectors

FIGURE 4-1: Personal TBC III I/O Connectors

SERIAL DATA INPUT (RJ-14)

This connector is not used when the TBC III card is used in the ES-2200 Expansion System.

S-VIDEO INPUT

This 4-pin connector is used to input S-Video (SVHS or Hi8) to the TBC card. It is normally connected to the S-Video

output of a playback VCR using a standard 4-pin to 4-pin S-Video cable. Some JVC industrial S-VHS players use a 7-

pin connector for their S-Video output. To interface with such machines, a 7-pin to 4-pin adapter cable is required.

NTSC VIDEO INPUT

This BNC connector feeds composite NTSC video to the TBC card. It can be connected to the video output of a

playback VCR or any composite NTSC source such as a TV tuner, laser disk player, camera, etc.

GENLOCK TIMING

REMOTE INPUT (RJ-14)

S-VIDEO INPUT

NTSC VIDEO INPUT

NTSC VIDEO OUTPUT

MULTI I/O OUTPUT

GENLOCK INPUT