Operator`s manual

30
MicroSYNC Configuration Functions
Button Function/ Mode
VRT BLKG Vertical Blanking Width
1. Narrow
2. Wide
MONO Monochrome Mode
1. Normal
2. Forced Monochrome
GEN MD Genlock Adjust
1. Auto
2. External Reference
3. Internal Reference
4. Ext. Ref. and Genlock Adjust Disable
5. Auto and Genlock adjust Disable
BURST Output Burst Mode
1. Auto
2. On
3. Off
VID ADV Video Advance
(VS-2410 only) 1. Normal
2. Advance Video 1 line
3. Advance Video 2 lines
SYNC MD Synchronizer Mode
1. 4-Field
2. Frame (2-Fields)
3. Hot Frame
CLAMP Clamp Speed Select
1. Normal
2. Fast
IN LOCK Input Lock Mode
1. Auto
2. Burst
3. Line
CLIP MD Clip Mode Select
1. Clipping Off (Default
* 2. Black & White Clip On
3. Black Clip On, White Off
* 4. Black Clip Off, White On
HOT SW Hot Switch Mode
1. Off
2. Freeze Frame
3. Black
* VS-2410 Only
Note: Mode 1 is the default factory setting for all functions.