Specifications

e-mail: [e-mail] voice: 360.854.9559 fax: [phone]
18
SS 4x4 Installation and Operation Manual
SECTION TITLE
Special MIX mode commands (the switcher doesn’t need to be in MIX mode).
*uiiO1 For input ii, set output 1 on without affecting any other
*uiiO2 For input ii, set output 2 on without affecting any other
*uiiO3 For input ii, set output 3 on without affecting any other
*uiiO4 For input ii, set output 4 on without affecting any other
*uiiO5 For input ii, set output 1 off without affecting any other
*uiiO6 For input ii, set output 2 off without affecting any other
*uiiO7 For input ii, set output 3 off without affecting any other
*uiiO8 For input ii, set output 4 off without affecting any other
Information Retrieval Commands
*POLL - Respond with unit (ID) address in appropriate time slot. If there are multi-
ple units on the line, each will respond with a different delay after receipt of this
command.
*uSL - Send Audio Status: SuLo,x,x,x,x<CR><LF>. “u” is unit ID, “o” is output,
and “x” is “1”for connected; “0” for not connected for each respective input.
*uSPii - Send single input (GPI) PIP status. Response is “SuP,ii,x” where “x” is 0
if the corresponding input is high, 1 if low.
*uSPA - Send ALL input (GPI) PIP status. Response is:
“SuP,A,x,x,x,x,x,x,x,x,x,x,x,x,x,x,x,x<CR><LF > where input 0 is first and input 15
is last. “x” is 0 if the corresponding input is high, 1 if low.
*uSO - Send status of all Open Collectors. Response is: SuO,x,x,x,x<CR><LF> (0
= OFF).
*uSR - Send status of all relays. Response is: SuR,x,x,x,x<CR><LF> (0 = OFF).
*uSS - Send status of silence sensor: SuS,a<CR><LF> a = 0 (not silent), 1 = silent
Information Retrieval Commands
*uU - Send Unit Information:<name)><version (><cr><lf Example: SS4.4 V:1.7
*uY - Display configuration
Real Time Control Commands
*uDxx - Delay xx seconds before processing next command.
*uDLxxx - Delay xxx seconds before processing next command.
*uZx - Echo character “x” to serial control port. This is useful in debugging com-
mand strings.
WEBSITE:
Visit our web site for
product updates and
additional information.