Specifications

NTI VEEMUX DVI VIDEO MATRIX SWITCH
25
Command Reply Description
Gs nn
*<CR>
dwt<CR>
Read set Scanning Sequence dwell time value (dwt) for specific
Output (nn) in seconds (see also "Scanning Sequences" on page
38)
Sa nn,mm *<CR> Set scan list of individual output nn to all inputs mm
Sc nn *<CR> Clear scan list of individual output nn
S+ nn,mm *<CR> Add input mm to Scan List of output nn
S- nn,mm *<CR> Remove input mm from Scan List of output nn
Sx nn *<CR>oooxoxxxooooxxx<CR> Display the Scan List of output nn (o=skip x=don't skip)
CP
User is prompted to introduce the
password twice
Change password- five (5) characters minimum
<Ctrl>-<X>
(see note 4 below)
Good Bye.
Connection to host lost.
Quit telnet session
H(elp) or
h(elp)
Displays the list of commands Help
Grayed commands are for models with audio option.
Notes:
1. The commands must be typed exactl
y as shown in the chart. The commands are case sensitive.
2. If a mistake is made, the user must backspace to the beginning and completely retype the command.
3. If a command is sent that the VEEMUX does not recognize or exceeds the configuration of the switch, the
reply "?" may be received. Check the command syntax and try again.
4. To quit the telnet session, press the keyboard keys <Ctrl><X> + <Enter>.