Specifications

NTI VEEMUX DVI VIDEO MATRIX SWITCH

4. During the installation, your PC will assign a COM port number to the USB port attached to the VEEMUX. You will need to

identify the COM port number assigned. This information can be viewed in your Device Manager list (below) if you didn’t take

note of it during installation.

Figure 10- COM port assigned to VEEMUX

Using the USB Console Port

The virtual COM port will be used to enable serial control over the VEEMUX (see RS232 control on page 18). When you open a

terminal program or the Matrix Switcher’s Control Program (page 21), you will need to configure the program to use the correct

COM port (see Figure 10 and Figure 11 ).

Figure 11- Configure COM port in Matrix Switcher's Control Program

COM Port

ssi

nment