Specifications

NTI VEEMUX DVI VIDEO MATRIX SWITCH
5
Make All Connections
1. Connect a DVI male cable (15 feet maximum) between each video source and an “Input” connector on the rear of the
VEEMUX.
Figure 3- Connect video sources to VEEMUX
2. Connect a DVI male cable (15 feet maximum) between each display device and an “Output” connector on the rear of the
VEEMUX.
Figure 4- Connect display devices to VEEMUX
Note: DVI cables longer than 15 feet may provide poor video performance on this product.
RJ45
"<USB>"
RJ45
"<USB>"
FUSE T2A,250V
AC INPUT 100-240VAC,30W
INPUT 1INPUT 6INPUT 7INPUT 8 INPUT 5
INPUT 2
INPUT 3INPUT 4
RS232
ETHERNET
(DCE)
OUTPUT 1OUTPUT 2OUTPUT 3OUTPUT 4OUTPUT 5OUTPUT 6OUTPUT 7OUTPUT 8
REAR VIEW OF SM-8X8-DVI-LCD
Mating Face of
DVI-I Single Link Male
DVD Player
DVI-IS-xx-MM
DVI-IS-xx-MM
Cable Box
RJ45
"<USB>"
RJ45
"<USB>"
FUSE T2A,250V
AC INPUT 100-240VAC,30W
INPUT 1INPUT 6INPUT 7INPUT 8 INPUT 5
INPUT 2
INPUT 3INPUT 4
RS232
ETHERNET(DCE)
OUTPUT 1OUTPUT 2OUTPUT 3OUTPUT 4OUTPUT 5OUTPUT 6OUTPUT 7OUTPUT 8
REAR VIEW OF SM-8X8-DVI-LCD
DVI Monitor
Projector
HDTV
DVI-IS-xx-MM
DVI-IS-xx-MM
DVI-IS-xx-MM
For video sources with HDMI
connector, use DVI-HDMI-xx-MM
cable
For display devices with HDMI
connector, use DVI-HDMI-xx-MM
cable