Specifications

e-mail: [e-mail] voice: 360.854.9559 fax: [phone]
8
SS 4.1 Plus Installation and Operation Manual
INSTALLATION
STEP 4: MOUNTING
Mount the unit on a rack shelf, such as the Broadcast Tools RA-1, allowing adequate
airflow for cooling. The RA-1 is furnished with filler panels to cover open spaces.
Up to three units may be installed on one RA-1.
STEP 5: CONNECT YOUR EQUIPMENT
The SS 4.1 Plus interfaces to your equipment (sources and loads) through the rear
panel plug-in euroblock screw terminals. Follow the legends for the desired audio
input, output and remote control connections, which appear on the rear side of the
chassis. Before installing a wire, remove the plug-in euroblock screw terminal and
turn each capture screw fully counterclockwise. Strip each conductor to a length of
0.25” and insert the conductor fully into the terminal. Turn the capture screw fully
clockwise to secure the conductor. The terminals accommodate wire sizes from 16
- 28 AWG solid or stranded wire.
Control
The front panel functions are brought out through the rear panel “REMOTE” (Inx)
connector TB 4, providing a means of controlling the SS 4.1 Plus from a remote
point. The channel select inputs may be connected to any remote pair of switch con-
tacts and ground, such as external relays, switches, open-collector circuits, contact
closures or 5-volt TTL/CMOS logic signals.
WEBSITE:
Visit our web site for
product updates and
additional information.