Specifications

e-mail: [e-mail] voice: 360.854.9559 fax: [phone]
3
SS 4.1 MLR Installation and Operation Manual
INTRODUCTION
INTRODUCTION
Thank you for your purchase of a BROADCAST TOOLS® SS 4.1 MLR
transparent four input, one output switcher/router (referred to as the SS 4.1 MLR
throughout this manual). We’re confident that this product will give you many years
of dependable service. This manual is intended to give you all the information need-
ed to install and operate the BROADCAST TOOLS® SS 4.1 MLR.
SAFETY INFORMATION
Only qualified technical personnel should install the SS 4.1 MLR. Any
attempt to install this device by a person who is not technically qualified could result
in a hazardous condition to the installer or other personnel or damage to the SS 4.1
MLR or other equipment. Please ensure that proper safety precautions have been
taken before installing this device. If you are unfamiliar with this type of equipment,
please contact a properly qualified engineer to handle the installation and setup of
the SS 4.1 MLR. Broadcast Tools, Inc., is unable to support NON-Broadcast Tools
software, hardware or NON-Broadcast Tools computer/hardware/software prob-
lems. If you experience these problems, please research your hardware/software
instruction manuals or contact the manufacturers technical support department.
WHO TO CONTACT FOR HELP
If you have any questions regarding your product or you need assistance,
please contact your distributor from whom you purchased this equipment. If you
would like more information about Broadcast Tools® products, you may reach us at:
Broadcast Tools, Inc.
131 State Street
Sedro-Woolley, WA 98284-1503 USA
Voice: 360.854.9559
Fax: [phone]
Internet Home Page: www.broadcasttools.com
E-mail:[e-mail]
THANK YOU FOR CHOOSING
BROADCAST TOOLS® BRAND PRODUCTS!
CAUTION!
Broadcast Tools®
Products, as with any
electronic device, can
fail without warning.
Do not use this product
in applications where a
life threatening condition
could result due to failure.
NOTE:
This manual should be
read thoroughly before
installation and operation.
WEBSITE:
Visit our web site for
product updates and
additional information.