User manual
Table Of Contents
- User Manual
- Starlink SL9003Q
- Digital Studio Transmitter Link
- WARRANTY
- SL9003Q Manual Dwg # 602-12016-01 R: G Revision Levels:
- Using This Manual - Overview
- Section 1 System Features and Specifications
- Section 2 Quick Start
- Section 3 Installation
- Section 4 Operation
- Section 5 Module Configuration
- Section 6 Customer Service
- Section 7 System Information
- Table of Contents
- List of Figures
- List of Tables
- 1 System Features and Specifications
- 2 Quick Start
- 3 Installation
- 4 Operation
- 7.1 Introduction
- 7.2 Front Panel Operation
- 4.3 Screen Menu Navigation and Structure
- 7.4 Screen Menu Summaries
- 4.4.1 Meter
- 4.4.2 System: Card View
- 4.4.3 System: Power Supply
- 4.4.4 System: Info
- 4.4.5 System: Basic Card Setup
- 4.4.6 Factory Calibration
- 4.4.7 SYSTEM: UNIT-WIDE PARAMS
- 4.4.8 System: Date/Time
- 4.4.9 System: Transfer
- 4.4.10 System: External I/O (NMS)
- 4.4.11 Alarms/Faults
- 4.4.12 Radio: Modem Status (QAM)
- 4.4.13 Radio TX Status
- 4.4.14 Radio RX Status
- 4.4.15 Radio TX Control
- 4.4.16 Radio RX Control
- 4.4.17 Radio Modem (QAM) Configure
- 4.4.18 Radio TX Configure
- 4.4.19 Radio RX Configure
- 4.4.20 Radio Modem/TX/RX Copy Function
- 4.5 Intelligent Multiplexer PC Interface Software
- 4.6 NMS/CPU PC Interface Software
- 5 Module Configuration
- 6 Customer Service
- 7 System Description
- 8 Appendices
- Appendix A: Path Evaluation Information
- Appendix B: Audio Considerations
- Appendix C: Glossary of Terms
- Appendix D: Microvolt – dBm – Watt Conversion (50 ohms)
- Appendix E: Spectral Emission Masks
- Appendix F: Redundant Backup with TP64 and TPT-2 Transfer Panels
- Appendix G: Optimizing Radio Performance For Hostile Environments
- Appendix H: FCC APPLICATIONS INFORMATION - FCC Form 601
- Starlink SL9003Q & Digital Composite - 950 MHz Band
3-14 Section 3: Installation
Moseley SL9003Q 602-12016 Revision G
CHANNEL 1 connector on the receiver. Default interface is 300 baud, 8 bit, odd
parity. Confirm data is properly received through the radio.
This completes the bench tests for the SL9003Q system. If you have any problems or
discrepancies, please consult the Test Data Sheet to check factory readings. If there is
still a problem, please call Moseley Technical Services (see Section 6).
3.3 Site Installation
The installation of the SL9003Q involves several considerations. A proper installation is
usually preceded by a pre-installation site survey of the facilities. The purpose of this
survey is to familiarize the customer with the basic requirements needed for the
installation to go smoothly. The following are some considerations to be addressed
(refer to Figure 3-5 for Receiver Site Installation Details).
Before taking the SL9003Q to the installation site verify that the audio connections are
compatible with the equipment to be connected. Also, locate the information provided by
the path analysis which should have been performed prior to ordering the equipment. At
the installation site, particular care should be taken in locating the SL9003Q in an area
where it is protected from the weather and as close to the antenna as possible. Locate
the power source and verify that it is suitable for proper installation.