User manual

1-10 Section 1: System Features and Specifications
Moseley SL9003Q 602-12016 Revision G
1.3.7. Composite Specifications
Input Level
3.5 Vp-p for 100% modulation; (1.8 - 4.8 Vp-p rear-panel
adjustable)
Input Type
BNC female, unbalanced, 100kohms
Output Level
3.5 Vp-p for 100% modulation; (1.8 - 4.8 Vp-p rear-panel
adjustable)
Output Type
BNC female, unbalanced, Low-Z (<5 ohms)
Output Load
75 ohms or greater, maximum load capacitance 0.047
microfarads. Maximum recommended cable length 100ft RG-
58A/U
Data Interface (standard)
9-pin D male, RS-232, 300 baud, 8 bit, odd parity (default)
Data Interface (optional)
2 additional channels available with choice of: Voice; Low Speed
Async Data (RS-232); High Speed Sync Data (V.35, RS-449);
15-pin D female, IBOC transport
Rates: Async data, 300-38400 bps selectable
Sync data up to 64 kbps
Voice 16, 24, 32, 64 kbps
Trunk
15-pin D female, Synchronous V.35, RS-449, EIA-530
Rates: 2048 Mbps @ 32 QAM
2432 Mbps @ 64 QAM
1.3.8. Intelligent Multiplexer Specifications
Capacity
6 local Ports
Aggregate Rates
Up to 2.048 Mbps
Resolution
8000 bps, 768-2048 kbps; 4000 bps, 384-768 kbps; 2000 bps,
192-384 kbps, 1000 bps, 96-192 kbps; 500 bps, 48-96 kbps; 250
bps, 24-48 kbps
Clocks
Internal, Derived, External Port
Local Port Interfaces
Choice of:
UDP Stream/Ethernet
Voice; Low Speed Async Data (RS-232),
High Speed Sync Data (V.35, RS-449)
Data Rates
Low Speed 300-38400 bps;
Voice 16, 24, 32, 64 kbps;
High Speed to 2040 kbps
Trunk
V.35 or RS-449