User manual

1-4 Section 1: System Features and Specifications
Moseley SL9003Q 602-12016 Revision G
1.3 Specifications
1.3.1. System Specifications - Discrete
4 linear (32 or 44.1 kHz sample rate) + 2 data channels;
2 linear (44.1 kHz sample rate) + LAN (500 kbps) with 6-port
MUX
Audio Capacity
(Typical Configurations)
2 linear (44.1 kHz sample rate) + 1 data channel
Frequency Range(s)
160-240 MHz
330-512 MHz
800-960 MHz
1340-1520 MHz
1650-1700 MHz
(Fully Synthesized, front-panel programmable, no adjustments)
Frequency Step Size
25 kHz
Occupied Bandwidth
200/250/300/500 kHz
Note: Rate & QAM mode dependent, see Table 1-1 for details.
RF Spectral Efficiency
See Appendix
Threshold Performance
See Table 1-1 below for details.
Audio Frequency Response vs. Sample Rate:
32 kHz:
0.5 Hz-15 kHz; -3 dB bandwidth, +/- 0.2 dB flatness
44.1 kHz:
0.5 Hz-20 kHz; -3 dB bandwidth, +/- 0.2 dB flatness
48 kHz:
0.5 Hz-22.5 kHz; -3 dB bandwidth, +/- 0.2 dB flatness
Audio Distortion
<0.01%
<0.01% at 1 kHz (compressed)
Audio Dynamic Range
92 dB Digital (AES/EBU) IN/OUT
83 dB Analog IN/OUT
Audio Crosstalk
< -80 dB
Audio Data Coding Method
Linear
ISO/MPEG (Layer II)
Audio Sample Rate
Selectable 32, 44.1, 48 kHz built-in rate converter
Audio Coding Time Delay
Linear: 0 ms
ISO/MPEG: 22 ms
Channel Coding Time Delay
(Add to Audio Coding Delay
above)
Depends on Interleave Factor - QAM Modem Configuration:
1 - 2.6 mS
2 - 3.7 mS
3 - 5.0 mS (typical)
4 - 6.0 mS
6 - 8.0 mS
12 - 14.0 mS