Specifications

e-mail: [e-mail] voice: 360.854.9559 fax: [phone]
27
Site Sentinel
®
16 Installation and Operation Manual
SETUP
“Email/Network Setup” Web Page – SMTP Settings
SMTP Server Address: The user can enter either an IP address in the
xxx.xxx.xxx.xxx format or a URI in the form:
smtp.comcast.net. In order to resolve the URI, a
working DNS server must be present or its IP address
entered into the system.
SMTP Port: Normally Port 25 Default: 25
SMTP Return Address: Enter your return email here. If an email cannot be
delivered, a message stating why will be sent to this
address.
NOTE: The user must enter the following items before an email can be suc-
cessfully sent: SMTP Server Address, SMTP Port, SMTP Return Address,
SMTP Host ID, SMTP username and SMTP password must be supplied if
authentication is turned on and the Recipient Address 1. The test email is sent
to email recipient address 1.
The user should press the “Save Settings” button after entering the SMTP informa-
tion before attempting an email test. If authentication fails, the email is not sent,
please ensure that the username and password is correct.
SMTP Host ID: Enter something here to identify the device.
SMTP Authentication: When checked, Base64 SMTP authentication is
supported by clicking on the checkbox.
SMTP Username: Enter user name here.
SMTP Password: Enter password here.
“Email/Network Setup” Web Page – Email Logging Settings
Logging Email Address: IP address for the “Logging” email recipient
(may be different from the 8 “Alarm”
Recipient Addresses. Logging emails and
Daily emails are sent to this address.
Logging Email Snapshot Interval: The period in hours that a snapshot is taken of
the system. An email is not sent on this interval.
Logging Email Update Interval: The period in hours that the snapshots are
emailed. This email may contain multiple
snapshots if the Snapshot Interval is less than
the Update Interval. Each snapshot will be
identified by the date and time.