Specifications

e-mail: [e-mail] voice: 360.854.9559 fax: [phone]
22
Site Sentinel
®
16 Installation and Operation Manual
SETUP
Relays
Relay label: Used to identify the device.
Alarms OFF: This option enables the sending of an email when the relay is OFF.
Alarms ON: This option enables the sending of an email when the relay is ON.
Email Addresses: This allows you to configure up to 8 emails to be sent whenever the
relay is turned ON or OFF.
Pulse: This is the number of milliseconds the relay will be toggled when
the pulse is activated.
NOTE: Pulse will toggle the relay, delay for the specified amount of time and then tog-
gle the relay again. If the relay is already on, Pulse will turn it off, delay then turn it
on.
Relays – Event Action Sequencer
Event action sequencer: Used to perform a relay function when other I/O devices are
within/outside the configured range.
Enable: Enables the selected input to monitor for each relay.
Action: When (meter, status, silence sensor, power failure or tempera-
ture) (input number) is (in ? condition) delay (xx) seconds then
engage for (xx) seconds.
Event action sequencer EXAMPLE: When (meter) (1) is (in High Alarm) delay (1) seconds
then engage for (2) seconds.
In the above example: When [metering input] [1] is [in high alarm] for more than [1] second,
(the desired relay) then engage for [pulse] 2 seconds.
NOTE: After any item has been changed, you MUST press the “Save Settings” button
for your changes to be saved.
WEBSITE:
Visit our web site for
product updates and
additional information.