Specifications

e-mail: [e-mail] voice: 360.854.9559 fax: [phone]
13
Site Sentinel
®
16 Installation and Operation Manual
SETUP
Opening the LOGIN Web Page
1. Connect the supplied GRAY colored XOVER cable between the PC’s Ethernet
port and the products “NET” network RJ45 jack.
2. Connect the supplied 12 volt DC only, 2.5 amp power supply to the product’s
power jack labeled 12V DC Power. Verify that the front panel green POWER
LED is ON and the left “LINK” LED above the “NET” Network RJ-45 connec-
tor is illuminated
Ethernet (NETWORK) port LED indicator functions
3. Open the product’s login page by typing the following URL into the browser:
http://192.168.1.55 a username and password is required to change any
parameter and are case sensitive.
Factory “login” defaults: username: admin (lower case)
password: 1234
4. Once you are logged in, follow this manual for setup and/or operational
information.