Specifications
e-mail:
support@broadcasttools.com
voice:
360.854.9559
fax:
866.783.1742
10
SS 2.1 Term III Installation and Operation Manual
INSTALLATION
* SAGE ENDEC INSTALLATION GUIDELINES
Dip Switch Setup: Follow the tables below for setup options:
Unit ID: SW5-1 SW5-2
ID 0 * OFF OFF
ID 1 ON OFF
ID 2 OFF ON
ID 3 ON ON
Station ID: SW5-3 SW5-4
2 ON OFF
1 * OFF OFF
3 OFF ON
4 ON ON
Operation: SW5-6 SW5-7
Normal * OFF OFF
Sustained ON OFF
EAS switcher OFF ON (SAGE/ENDEC, MSRP Clone, 1200 baud serial)
Toggle ON ON
Note: After changing any dipswitch, please repower the unit. * Denotes factory setting.
Connecting a single SS 2.1 III/Term to the Sage ”Endec” serial port:
Attach the supplied “S9” DB-9 female adapter to the Sage serial port. Connect the module
cable to the adapter and the other end to the RJ11 on the SS 2.1 III/Term. Configure the
above dip switch SW5 for the desired operation.
Connecting two or more SS 2.1 III/Term’s to the SAGE “Endec” Serial Port:
Multiple SS 2.1 III/Term may be cascaded serially to operate from the same serial port. The first
step is to assign ID’s to each SS 2.1 III/Term. One suggestion is to assign ID1 to the first SS 2.1
III/Term and ID2 to the second switcher. The second step is to assign a station ID to each switch-
er. The third step is to parallel the serial ports of the SS 2.1 III/Term’s. Plug the male end of the
duplex modular adapter into the supplied female “S9”, DB-9 to RJ-11 adapter, then attach the
supplied reversed modular line cords into each of the duplex modular adapter receptacles (Radio
Shack Cat No. 279-0357) and the other ends into each of the SS 2.1 III/Term modular recepta-
cles. See the diagram below. NOTE: Three or more SS 2.1 III/Term’s may be daisy chained by
using the above description and a Radio Shack Cat No. 279-0410, 5-jack modular adapter.
WEBSITE:
Visit our web site for
product updates and
additional information
The pin out of the adapter is shown below.
RJ-11
Adapter
Pin
DB-9
D-Sub
SS 2.1 Term III
(Point of view)
4 3 RS-232 Receive
3 2 RS-232 Transmit
2 5 Ground
1423
Modular Jack Pin
Numbers
To SS 2.1 III/Term #1
To SS 2.1 III/Term #2