Specifications

88
www.paladin-tools.com solutions
▼
Wire Ferrule Crimper
Professional-quality crimping tool
for insulated and non-insulated wire
ferrules with a range of 20-10 AWG
(0.5-6.0 mm
2
).
■ Ferrules conform to DIN 46228
Pt. 1 and 4
■ Ferrule insertion from the side of
the tool
■ Single tool for entire wire range
(no additional dies are required)
■ Durable steel construction for
long life
■ Ergonomic handles for low-effort
operation
■ Lifetime warranty on frame;
one year on die set
Technical
Crimper Weight 15.2 oz. (430 g)
Die Weight 2.0 oz. (57 g)
Ordering Part Number
Wire Ferrule Crimper 1647
Replacement die set 2681
CTI 6 Terminal Crimper
Professional crimping tool for
insulated terminal lugs with a wire
range of AWG 20-10 (0.1-6.0 mm
2
).
■ Fixed steel die system
■ Built-in locator
■ Crimps insulated terminal lugs,
cable lugs and parallel and
serial splices
■ Durable steel construction for
long life
■ Long ergonomic handles for
low-effort operation
■ Color-coded crimp areas for
size identification
■ Lifetime warranty
Technical
Weight 25 oz. (710 g)
Crimp profile
Red: AWG 20-16 (0.5-1.5 mm
2
)
Blue: AWG 16-14 (1.5-2.5 mm
2
)
Yellow: AWG 12-10 (4.0-6.0 mm
2
)
Ordering Part Number
CTI 6 900612
Professional crimping tool for non-
insulated terminal lugs with a wire
range of 20-10 AWG (0.5 – 6.0 mm
2
).
■ Fixed steel die system
■ Built-in terminal locator
■ Crimps non-insulated terminal
lugs, cable lugs and parallel and
serial splices
■ Durable steel construction for
long life
■ Ergonomic handles for low-effort
operation
■ Lifetime warranty
Technical
Weight 13.5 oz. (380 g.)
Crimp profile
Small: 20-16 AWG (0.5-1.5 mm
2
)
Medium: 16-14 AWG (1.5-2.5 mm
2
)
Large: AWG 12-10 AWG (4.0-6.0 mm
2
)
Weight 14 oz. (400 g)
Ordering Part Number
HTN 21L 1618
Non-Insulated Terminal
Crimper
Electrical & Industrial Cable Crimpers
Phone [phone]
5 Electrical Industrial 07 FINAL:Layout 1 10/18/07 3:58 PM Page 88