Specifications
83
solutions www.paladin-tools.com
▼
Tool & Die: 8021 Insulated Terminals and Lugs, Solid or Stranded Wire, 22-10 AWG (.34-6.0 mm
2
),
Die Only: 2035 12-10(Yellow)/16-14(Blue)/22-18(Red) (6-4/2.5-1.5/.34-.75 mm
2
),
For Large Professional Terminals (Panduit, T & B, etc.)
Tool & Die: 8022 Insulated Terminals and Lugs, Solid or Stranded Wire, 22-10 AWG (.34-6.0 mm
2
),
Die Only: 2040 10-12(Yellow)/16-14(Blue)/22-18(Red) (6-4/1.5-2.5/.34-.75 mm
2
),
For Standard Commercial Terminals (Hardware Store Brands)
Tool & Die: 8023 Insulated Terminals and Lugs, Solid or Stranded Wire, 26-14 AWG (.10-2.5 mm
2
),
Die Only: 2029 16-14(Blue)/22-18(Red)/22-26(Yellow) (1.5-2.5/.34-.75/.34-.10 mm
2
),
For Smaller Wire Barrel Terminals
Tool & Die: 8024 Non-Insulated Terminals and Lugs, Solid or Stranded Wire, 22-8 AWG (.34-10 mm
2
),
Die Only: 2031 10-8/14-12/18-16/22-20 (6-10/2.5-4/.75-1.5/.34-.50 mm
2
)
For Standard Commercial Terminals
Tool & Die: 8026 Open Barrel Non-Insulated Terminals and Lugs - narrow, Stranded Wire,
Die Only: 2033 22-14 AWG (.34-2.5 mm
2
), F-Type*, 22-18/16-14/12-10,
(.34-.75/1.5-2.5/4-6 mm
2
), For Standard Commercial Terminals
Tool & Die: 8027 Open Barrel Non-Insulated Terminals and Lugs - wide, Stranded Wire,
Die Only: 2096 22-14 AWG (.34-2.5 mm
2
), F-Type*, 16-14/22-18 (1.5-2.5/.34-.75 mm
2
)
For Standard Commercial Terminals
Tool & Die: 8029 Open Barrel D-Sub Contact Pins, Stranded Wire, 28-20 AWG (.08-.5 mm
2
),
Die Only: 2097 F-Type*, 28-24/22-20 (.08-.2/.34-.5 mm
2
)
For Standard D-sub Pins Only
NOTE: For the crimpers and die sets above, the pin AWG size must be inside the range of the crimp area AWG size to work.
For example, if the area is for 28-24 AWG, the pin must have an AWG size rating between 28-24, no smaller and no larger.
In this example, a 28-22 AWG rated pin will not work; it is too large in size.
*This is also known as “B-Type.”
Tool & Die: 8025 Insulated & Non-Insulated Wire Ferrules, Stranded Wire, 22-10 AWG
Die Only: 2095 (.34-6.0 mm
2
), 22-20/18-16/14-12/10 (.34-.50/.75-1.5/2.5-4/6 mm
2
)
For DIN or US Type Wire Ferrules
Crimpers Electrical & Industrial Cable
Fax 800.272.5257
Part Numbers Description
Insulated Terminal Crimpers
Non-Insulated Terminal Crimpers
Open Barrel Contacts, Box Contacts, and Terminals Crimpers
Wire Ferrule Crimpers
5 Electrical Industrial 07 FINAL:Layout 1 10/18/07 3:58 PM Page 83