Specifications

81
solutions www.paladin-tools.com
▼
Tool & Die: 1605* Insulated terminals Solid or stranded 16-14(Blue)/22-18(Red) Standard commercial
Die Only: NONE & lugs wire, 22-14 AWG (1.5-2.5/.34-.75 mm
2
) terminals
(.34-2.5 mm
2
) Terminal-Elliptical 2-level
Tool & Die: 1618* Non-insulated Solid or stranded 12-10/16-14/20-18 AWG Standard commercial
Die Only: NONE terminals & lugs wire, 20-10 AWG (4-6/1.5-2.5/.5-.75 mm
2
) terminals
(.5-6.0 mm
2
) Terminal, Indent
Tool & Die: 1631* Open barrel Stranded wire, 24-22/18-14 F-Type Molex/Waldom/
Die Only: NONE contact pins 24-14 AWG (..2-.34/.75-2.5 mm
2
) Leoco type connectors
(.2-2.5 mm
2
)
Tool & Die: 1645* Open barrel Stranded wire, 30-24/22-18 F-Type Molex/Waldom/
Die Only: NONE contact pins 30-18 AWG (.05-.2/.34-.75 mm
2
) Leoco type connectors
(.05-.75 mm
2
)
Tool & Die: 1646* Open barrel D-sub Stranded wire, 28-24/22-20 F-Type For standard
Die Only: NONE contact pins 28-20 AWG (.08-.2/.34-.5 mm
2
) D-sub pins only
(.08-.5 mm
2
)
Tool & Die: 1670 Rack and panel open Solid or stranded 28-24 /22-18 EDAC or ELCO
Die Only: NONE barrel contacts 28-18 AWG (.08-.2/.34-.75 mm
2
)
(.08-75 mm
2
)
Tool & Die: 1647 Insulated & Non- Stranded wire, 20-10 Trapezoid For DIN or US type
Die Only: 2681 insulated Ferrules 20-10 AWG (.5-6.0 mm
2
) wire ferrules
(.5-6 mm
2
)
Tool & Die: 1648* Insulated & Non- Stranded wire, 20-12 Trapezoid For DIN or US type
Die Only: NONE insulated Ferrules 20-12 AWG (.5-4.0 mm
2
) wire ferrules
(.5-4 mm
2
)
Tool & Die: 901435* Insulated & Non- Stranded wire, 24-10 Trapezoid Rotatable crimp die
Die Only: NONE insulated Ferrules 24-10 AWG (.2-6.0 mm
2
)
(.2-6 mm
2
)
Tool & Die: 1649* Insulated & Non- Stranded wire, 10/8/6 Trapezoid For DIN or US type
Die Only: NONE insulated Ferrules 10-6 AWG (6/10/16 mm
2
) wire ferrules
(6-16 mm
2
)
Crimpers Electrical & Industrial Cable
Int’l Fax [phone]
Part Numbers Connector Type(s) Cable Type(s) Crimp Sizes Type Connector Manufact./Remarks
Insulated Terminal Crimpers
Non-Insulated Terminal Crimpers
Open Barrel Contacts, Box Contacts, and Terminals Crimpers
Wire Ferrule Crimpers
*The die sets for these tools are NOT removable or interchangeable. Removal of the die sets will void the warranty and cause the tool to lose calibration.
5 Electrical Industrial 07 FINAL:Layout 1 10/18/07 3:58 PM Page 81