Specifications
Tool & Die: 8021 Insulated Terminals and Lugs Solid or Stranded Wire, 12-10 (Yellow)/16-14 (Blue)/22-18 (Red) For Large Professional Terminals
Tool & Die: 1305 22-10 AWG (.34-6 mm
2
) (6-4/2.5-1.5/.34-.75 mm
2
) (Panduit, T & B, etc.)
Die Set: 2035
Tool & Die: 8022 Insulated Terminals and Lugs Solid or Stranded Wire, 12 (Yellow)/16-14 (Blue)/22-18 (Red) For Standard Commercial Terminals
Tool & Die: 1308 22-12 AWG (.34-4 mm
2
) (4/1.5-2.5/.34-.75 mm
2
) (Hardware Store Brands)
Die Set: 2040
Tool & Die: 8023 Insulated Terminals and Lugs Solid or Stranded Wire, 16-14 (Blue)/22-18 (Red)/22-26 (Yellow) For Smaller Wire Barrel Terminals
Tool & Die: 1334 26-14 AWG (.10-2.5 mm
2
) (1.5-2.5/.34-.75/.34-.10 mm
2
)
Die Set: 2029
Part Numbers Type(s) Connector Type(s) Crimp Sizes Connector Manufacturers or Remarks
Insulated Terminal Crimpers
Tool & Die: 8024 Non-Insulated Terminals and Lugs Solid or Stranded Wire, 10-8/14-12/18-16/22-120 For Standard Commercial Terminals
Tool & Die: 1322 22-8 AWG (.34-10 mm
2
) (6-10/2.5-4/.75-1.5/.34-.50 mm
2
)
Die Set: 2031
Non-Insulated Terminal Crimpers
Tool & Die: 8026 Open Barrel Non-Insulated Terminals, Solid or Stranded Wire, 22-18/16-14/12-10 For Standard Commercial Terminals
Tool & Die: 1306 Narrow Lugs and Power Contacts 22-10AWG (.34-6 mm
2
), F-Type* (.34-.75/1.5-2.5/4-6 mm
2
)
Die Set: 2033
Tool & Die: 8027 Open Barrel Non-Insulated Terminals, Solid or Stranded Wire, 16-14/22-18 For Standard Commercial Terminals
Tool & Die: 1358 Wide Lugs and Power Contacts 22-14 AWG (.34-2.5 mm
2
), F-Type* (1.5-2.5/.34-.75 mm
2
)
Die Set: 2096
Tool & Die: 8029 Open Barrel D-Sub Contact Pins Solid or Stranded Wire, 28-24/22-20 For Standard D-sub Pins Only; not for HD D-subs
Tool & Die: 1359 RS-232 28-20 AWG (.08-.50 mm
2
), F-Type* (.08-.2/.34-.5 mm
2
)
Die Set: 2097
Open Barrel Contacts, Box Contacts, and Terminal Crimpers
Tool & Die: 8025 Insulated & Non-Insulated Solid or Stranded Wire, 22-20/18-16/14-12/10 For DIN or US Type Wire Ferrules
Tool & Die: 1360 Wire Ferrules 22-10 AWG (.34-6 mm
2
) (.34-.50/.75-1.5/2.5-4/6 mm
2
)
Die Set: 2095
Wire Ferrule Crimpers
* This is also known as “B-type”
102
www.paladin-tools.com
solutions
▼
8000 Series CrimpALL
®
& 1300 Series Interchangeable Die Set Reference
Phone 800.272.8665
7 Quick Guide & Reference 07 FINAL:54177_p001_019_out 10/19/07 10:04 AM Page 102