Specifications
Part Numbers Type(s) Connector Type(s) Crimp Sizes and Type Connector Manufacturers or Remarks
Coaxial Crimpers
1600 Series Interchangeable Die Set Reference
Phone 800.272.8665 Int’l Phone 001.804.550.1121
Tool & Die: 1606 Fiber optic Lucent Technologies ST II Type 0.190"(4.83 mm) HEX/ Lucent Ferrules/Sleeves
Die Set: 2044 0.105"(2.67 mm) RND/0.090"(2.3 mm)RND (not for use on ST II+ connectors)
Tool & Die: 1614 Fiber optic SMA/SMB/FC/Biconic Fiber 0.213"(5.4 mm)/0.178"(4.5 mm)/ SMA/FC/Biconic Fiber
Die Set: 2664 0.151"(3.83 mm) HEX
Tool & Die: 1668 Fiber optic 3M SC, ST 0.120"(3.05mm)/0.137"(3.48mm)/ 3M, Suncall, Fiber Source SC & ST
Die Set: 2668 0.190"(4.83mm) RND
NOTE: If the required crimp style and dimension is not listed above, or if you are not sure which is the correct crimp tool, divide the connector ferrule outside diameter by 1.155.
If the result is within +/- 0.004 inches of any of our sizes, then choose our tool.
Fiber Optic Crimpers
98
www.paladin-tools.com
solutions
▼
Tool & Die: 1609 Belden 8281 & 7505 BNC/TNC, 3 Piece HDTV 0.324"(8.2 mm)/0.068"(1.7 mm) HEX Kings, ADC, Amphenol HDTV
Die Set: 2660 & 0.042"(1.0 mm) SQ
Tool & Die: 1611 RG59, Belden 1505A, BNC/TNC, 3 Piece HDTV 0.255"(6.5 mm)/0.068"(1.7 mm) HEX Kings, ADC, Trompeter, Amphenol HDTV
Die Set: 2661 Belden 8241 & 0.042"(1.0 mm) SQ.
Tool & Die: 1612 RG6, Belden 1694A, BNC/TNC, 3 Piece HDTV 0.275"(6.9 mm)/0.178"(4.5 mm) HEX Kings HDTV
Die Set: 2662 Belden 1855A & 0.042"(1.0 mm) SQ.
Tool & Die: 1613 Belden 1694A, NT735, BNC/TNC, 3 Piece HDTV 0.278"(7.0 mm)/0.197"(5.0 mm) HEX ADC HDTV
Die Set: 2663 Belden 8218 & 0.042"(1.0 mm) SQ.
Tool & Die: 1616 RG174/RG179/RG188 BNC/TNC 0.178"(4.5 mm)/0.068"(1.7 mm) HEX Crimps Pins, Ferrules, & Sleeve
Die Set: 2003 and Small Cable Conn. & 0.042"(1.0 mm) SQ.
Tool & Die: 1617 RG58, RG59, RG62AU BNC/TNC 0.255"(6.5 mm)/0.213"(5.4 mm)/ Crimps Pins, Ferrules, & Sleeve
Die Set: 2005 0.068"(1.7 mm) HEX
Tool & Die: 1619 RG59, RG62AU, BNC/TNC 0.324"(8.2 mm)/0.255"(6.5 mm)/ Crimps Pins, Ferrules, & Sleeve
Die Set: 2019 Belden 8281/8241 0.068"(1.7 mm) HEX
Tool & Die: 1669 Belden 1855A, 1865A, 1505A, BNC/TNC, 3 Piece HDTV 0.255"(6.5 mm)/0.278"(7.0 mm)/ Kings, ADC, B&L, Trompeter,
Die Set: 2683 1505F, 1694A, 1694F, 179DT 0.178"(4.5 mm)/0.041"(1.0 mm) HEX Amphenol, Switchcraft
7 Quick Guide & Reference 07 FINAL:54177_p001_019_out 10/19/07 10:04 AM Page 98