Specifications
e-mail: support@broadcasttools.com voice: 360.854.9559 fax: 866.783.1742
3
Silence Sentinel
®
Basic Installation and Operation Manual
SECTION TITLE
INTRODUCTION
Thank you for your purchase of a Broadcast Tools® “Silence Sentinel® Basic”
(referred to as the Silence Sentinel® Basic throughout this manual). We’re confident
that this product will give you many years of dependable service. This manual is
intended to give you all the information needed to install and operate the Broadcast
Tools® “Silence Sentinel® Basic”.
SAFETY INFORMATION
Only qualified technical personnel should install Broadcast Tools products. Any
attempt to install this device by a person who is not technically qualified could result
in a hazardous condition to the installer or other personnel or damage Broadcast
Tools product or other equipment. Please ensure that proper safety precautions have
been taken before installing this device. If you are unfamiliar with this type of
equipment, please contact a properly qualified engineer to handle the installation
and setup of the Broadcast Tools product.
Broadcast Tools, Inc., is unable to support NON-Broadcast Tools software, hard-
ware or NON-Broadcast Tools computer/hardware/software problems. If you experience
these problems, please research your hardware/software instruction manuals or contact the
manufacturers technical support department.
WHO TO CONTACT FOR HELP
If you have any questions regarding your product or you need assistance, please con-
tact your distributor from whom you purchased this equipment.
If you would like more information about Broadcast Tools® products, you may
reach us at:
Broadcast Tools, Inc.
131 State Street
Sedro-Woolley, WA 98284-1540 USA
Voice: 360.854.9559
Fax: 866.783.1742
Internet Home Page: www.broadcasttools.com
E-mail: support@broadcasttools.com
THANK YOU FOR CHOOSING
BROADCAST TOOLS® BRAND PRODUCTS!
CAUTION!
Broadcast Tools®
Products, as with any
electronic device, can
fail without warning.
Do not use this product
in applications where a
life threatening condition
could result due to failure.
NOTE:
This manual should be
read thoroughly before
installation and operation.
WEBSITE:
Visit our web site for
product updates and
additional information.