Specifications

e-mail: [e-mail] voice: 360.854.9559 fax: [phone]
38
ADMS 44.22 Installation and Operation Manual
OPERATION
only in Overlap Mode; sending the command in Mix or Interlock Modes
returns an EEE<CR><LF>.
4.12 Audio Switcher: Mute Commands
Mute commands are non-modal. Muting an input affects only the selected
channel, regardless of the Switcher Mode.
MUTE[ic][oc]Mute Input in Output
Mutes a single input in a single output. The MUTE command can also mute
a single input in both outputs, all inputs in a single output, or all inputs in
both outputs.
[ii]MA[o] Mute Input in Output (ACS 8.2)
Mutes a single input in a single output.
[ii]MA Mute Input In Outputs 1 & 2 (ACS 8.2)
Mutes a single input in both outputs 1 and 2.
M[o] Mute All Inputs In Output (ACS 8.2)
Mutes all inputs in a single output.
MA Mute All Inputs In Outputs 1 & 2 (ACS 8.2)
Mutes all inputs in both outputs 1 and 2
[ii]5 Mute Input In Output 1 (ACS 8.2)
Mutes a single input in Output 1 only.
[ii]6 Mute Input In Output 2 (ACS 8.2)
Mutes a single input in Output 2 only.
4.13 Audio Switcher: Dim Commands
Dim commands are non-modal. Dimming an input affects only the selected
channel(s), regardless of the Switcher Mode. Sending any modal or non-
modal connect command to a dimmed input un-dims the input. Sending a
fade-up command to a dimmed input fades the input from the dimmed level
up to unity gain, and sending a fade-down command to a dimmed input
faders the input down from the dimmed level.
DM[ii][x] Dim Input To Preset Level in Output 1 (ACS 8.2)
Dims a single input to a preset level in Output 1 only, and sets the dim level
for this input to match.
[x] 1 = -3 dB; 2 = - 6 dB; 3 = -10 dB; 4 = -15 dB; 5 = -20 dB
DME[ic][oc][x] Dim Input In Output
Dims a single input in a single output to the dim level specified by the DML
(or DM) command. The DME command can also be applied to a single input
on both outputs 1 and 2, all inputs on a single output, or all inputs on both
WEBSITE:
Visit our web site for
product updates and
additional information.