Specifications

e-mail: [e-mail] voice: 360.854.9559 fax: [phone]
33
ADMS 44.22 Installation and Operation Manual
OPERATION
B2 Bypassed T:Peaking G: 0.0 F: 1000.0 Q: 1.0
B3 Bypassed T:High Shelf G: 0.0 F:20000.0 Q: 1.0
Analog Input 3
B1 Bypassed T:Low Shelf G: 0.0 F: 20.0 Q: 1.0
B2 Bypassed T:Peaking G: 0.0 F: 1000.0 Q: 1.0
B3 Bypassed T:High Shelf G: 0.0 F:20000.0 Q: 1.0
Analog Input 4
B1 Bypassed T:Low Shelf G: 0.0 F: 20.0 Q: 1.0
B2 Bypassed T:Peaking G: 0.0 F: 1000.0 Q: 1.0
B3 Bypassed T:High Shelf G: 0.0 F:20000.0 Q: 1.0
Digital Input 1
B1 Bypassed T:Low Shelf G: 0.0 F: 20.0 Q: 1.0
B2 Bypassed T:Peaking G: 0.0 F: 1000.0 Q: 1.0
B3 Bypassed T:High Shelf G: 0.0 F:20000.0 Q: 1.0
Digital Input 2
B1 Bypassed T:Low Shelf G: 0.0 F: 20.0 Q: 1.0
B2 Bypassed T:Peaking G: 0.0 F: 1000.0 Q: 1.0
B3 Bypassed T:High Shelf G: 0.0 F:20000.0 Q: 1.0
Digital Input 3
B1 Bypassed T:Low Shelf G: 0.0 F: 20.0 Q: 1.0
B2 Bypassed T:Peaking G: 0.0 F: 1000.0 Q: 1.0
B3 Bypassed T:High Shelf G: 0.0 F:20000.0 Q: 1.0
Digital Input 4
B1 Bypassed T:Low Shelf G: 0.0 F: 20.0 Q: 1.0
B2 Bypassed T:Peaking G: 0.0 F: 1000.0 Q: 1.0
B3 Bypassed T:High Shelf G: 0.0 F:20000.0 Q: 1.0
4.8 ALC Commands
ALCB1[ic][x] Enable Input ALC
Enables input channel ALCs. The ALCB1 command can be applied to a single
ALC on a single input, or all input ALCs.
[x] 0 = Bypassed; 1 = Enabled.
ALCB0[oc][x] Enable Output ALC
Enables output channel ALCs. The ALCB0 command can be applied to either
one or both output channel ALCs.
[x] 0 = Bypassed; 1 = Enabled.
ALCO1[ic][x] Set Input ALC Target Output Level
Sets the target output level for the input channel ALCs. The ALCO1 command
can also be applied to a single ALC on a single input channel, or all input chan-
nel ALCs. The ALC Target Output Level must be ? the ALC Threshold Level;
setting ALC Target Output Level < the ALC Threshold Level sets the ALC
Target Output Level = the ALC Threshold Level.
[x] Target Output Level Range = 0.0 ? -40.0 (dBFS)
ALCO0[oc][x]Set Output ALC Target Output Level