Specifications

e-mail:
[e-mail]
voice:
360.854.9559
fax:
866.783.1742
17
DAS 8.4 Plus Installation and Operation Manual
INSTALLATION
“PIP” with Programmable Pulse Stretcher:
If DIP Switch SW16-8 is ON, the Programmable Pulse Stretcher (PIP) provides
16 “PIP” (GPI) inputs. Each input must be 40ms or longer to be considered valid.
The Programmable Pulse Stretcher Duration may be globally set from 10ms to 2.55
seconds.
NOTE: When the unit ID is set to 0, no polling of “PIP” (GPI) inputs is
required.
Remote Control connector TB-1
18-position double-decker connector on the rear of the switcher.
AES inputs TB2 (IN1), TB3 (IN2), TB4 (IN3), TB5 (IN4), TB6 (IN5), TB7 (IN6),
TB8 (IN7) and TB9 (IN8).
Pin 1 + Pin 2 - Gnd
AES outputs TB10 (OP 1), TB11 (OP 2), TB12 (OP 3) and TB13 (OP 4).
Pin 1 + Pin 2 - Gnd
Balanced stereo analog audio output TB14.
Left - Left + Gnd Right - Right +
WEBSITE:
Visit our web site for
product updates and
additional information.