Specifications

e-mail:
[e-mail]
voice:
360.854.9559
fax:
866.783.1742
12
DAS 8.4 Plus Installation and Operation Manual
INSTALLATION
Front Panel Switches:
Switch(es) Function
1-8 Input Channels or Macros 1-8
Output 1 Output 1 selection
Output 2 Output 2 selection
Output 3 Output 3 selection
Output 4 Output 4 selection
Mute Turn off selected I/O
Macro Select any one of 8 Macros
Monitor Select Select any one of the four output channels. Sequences through each out-
put each time the switch is pressed.
Front panel LED indicators:
Front Panel LED’s # LED’s Activation Event/Mode Activation Behavior
Inputs connected toOutput 1 8 Green State of Connection On if connected
Inputs connected toOutput 2 8 Yellow State of Connection On if connected
Inputs connected toOutput3 8 Red State of Connection On if connected
Inputs connected toOutput 4 8 Red State of Connection On if connected
Power Status 1 Green Valid Power On
Monitor 4 Green Balanced output and Any one of four output channels
headphone monitor
Macro 1 Yellow Macro selection On if active
“PIP” Active 1 Green Any valid “PIP” input On if active
Stereo 10-LED Meter 20 assorted Audio Level Audio activity
SS 1 Red Analog Audio Silence On if stereo analog silence is detected
Sensor on the selected output.
Digital Error 1 Red Digital error On if a digital error is detected on the
selected output.
Sample-rate 4-colors Four sample rates Sample rate of input signal connected to
the monitored output.
Connecting the RS-232 Serial Port:
Use the provided modular 9-pin D-sub connector adapter (S9) and reversed
modular cord to connect the DAS 8.4 Plus’s serial connector to your serial port.
The pin out of the adapter is shown below.
RJ-11 DB-9 DAS 8.4 PLUS
Adapter Pin D-Sub (Point of view)
4 3 RS-232 Receive
3 2 RS-232 Transmit
2 5 Ground
Modular Jack Pin Numbers