Specifications

e-mail: [e-mail] voice: 360.854.9559 fax: [phone]
4
ADC-1 Plus Installation and Operation Manual
OPERATION
OPERATION
Power Insert the power plug into the power jack on the ADC-
1 Plus and the wall transformer into the proper AC
outlet. Verify that the power LED is lit.
Input Adjust LT/RT Adjust these controls to the desired AES output level.
Set to +4 dBu = -20dbFS at the factory.
Left VU calibrate trimmer – R5. Right VU calibrate trimmer – R6.
WEBSITE:
Visit our web site for
product updates and
additional information.