User's Manual

ManualsBrandsBroadcast Microwave Services ManualsElectronics6 GHz Power Amplifier

Broadcast Microwave Services, Inc. – 12367 Crosthwaite Circle – Poway, CA 92064 1

Phone: 800-669-9667, 1-858-391-3050 - Fax: 1-858-391-3049

Email: support@bms-inc.com Web: www.bms-inc.com

6GHz / 4W Power Amplifier

User Manual

(BPA-5CC-9)

Specifications are subject to change without prior notice.

This document contains confidential information and is intended for customer use only.

It cannot be duplicated without prior authorization from BMS.

Summary of content (6 pages)

PAGE 1
6GHz / 4W Power Amplifier User Manual (BPA-5CC-9) Specifications are subject to change without prior notice. This document contains confidential information and is intended for customer use only. It cannot be duplicated without prior authorization from BMS. Broadcast Microwave Services, Inc. – 12367 Crosthwaite Circle – Poway, CA 92064 Phone: 800-669-9667, 1-858-391-3050 - Fax: 1-858-391-3049 Email: support@bms-inc.com Web: www.bms-inc.
PAGE 2
WARNING! RF RADIATION EXPOSURE HAZARD This warning is provided by Broadcast Microwave Services (BMS) Inc. for safety purpose. The following information help to reduce the risk of RF exposure hazard. FCC Limit of RF Exposure According to Federal Communication Commission (FCC), the Maximum Permissible Exposure (MPE) for FR radiation has been set to 1.0 mW/cm2 for the 6 GHz Power Amplifier with maximum 4 Watt output power (OET Bulletin 65).
PAGE 3
Estimated RF Exposure for 4 W att 6GHz Pow er Amplifier 5.0 Power Density, mW/cm^2 4.0 3.0 2.0 1.0 0.0 0 100 200 300 400 500 600 700 Dis tance , cm Figure 1 Summary In order the keep the RF exposure within the FCC limit, it is necessary to maintain the safe distance from the antenna.
PAGE 4
LINEAR POWER AMPLIFIER (BPA-5CC-9) BPA-5CC-9 is a linear power amplifier with 4 watt maximum RF power and operating at 6.425 – 6.525 GHz). This power amplifier is used for increasing the transmitting range by boosting the 6GHz transmitter power to maximum 4 Watts. Application Portable 6GHz COFDM transmitters such as 6GHz Carry-Coder II, are used behind the camera in Electronic News Gathering (ENG). These transmitters are only capable to provide a medium RF power (e.g. 250mW).
PAGE 5
Specification: Ch Frequency Output Power Input Voltage Input Current Input RF Power Gain @ 12 dBm input Gain Flatness Gain vs. Temperature Operating Temperature Storage Temperature Dimensions Weight RF Input Connector RF Output Connector 6.425 – 6.525 GHz 4 Watt max. 28 VDC 7.3 Amp 16 mW (12 dBm) max. 25 dB ± 0.5 dB Over 50 MHz ± 1 dB Over Temperature -20° to +50°C 40° to +90°C 9.5” x 5” x 3” 5 lbs Type “N” Type “N” Isolator Protected CONTACT INFORMATION Broadcast Microwave Services, Inc. Phone: 1.858.
PAGE 6
The diagram of Figure 2 simply shows the connections, not indicating a practical installation. A more informative diagram is shown in Figure 3. Transmitting Antenna The antenna mast is located on the roof of the vehicle Transmitter Site ALC Loop Coaxial Cable Optional Battery Microphone RF Out RF Out 4W Max.