User's Manual

OPERATION

Field Set-up

These instructions are for setting up FCII systems that have been prepared and configured for quick field

set-up. If the FCII system is not being used with a tripod, be sure to set the FCII on a stable surface before

installing the antenna, connecting power, or operating.

For Tripod Use

Set the tripod up so that it is stable.

Mounting on the Tripod

Seat the FCII Tripod Mounting Plate into the Tripod Mount. Fully extend the lever and angle the unit to

maneuver the mounting plate in on one side, then the other. When it is seated, the mounting plate will be

just barely visible.

Figure 6 Not Seated

Figure 7 FCII Seated in Tripod Mount

Figure 8 Close the Clamp

Figure 9 Fold the lever flush

Lock the Clamp.