User's Manual

NOTE:
The Expert Menus should only be configured by advanced users. Improper configuration can result in transmission
failure.
Table 7 Expert Mode User Menus
Expert Menu Description How to Use
2454.25 MHz
Video bitrate
4.35 Mbps
Video Bitrate
Controls Picture Resolution.
Larger values increase the
resolution and increases the time
between picture updates. Smaller
values decrease resolution and
decreases the time between picture
updates.
This is an EXPERT Level parameter
To change the video bitrate, press OK. Use the Ï and
Ð buttons to change the value. The Î and Í buttons
move the cursor. Press OK when finished.
2454.25 MHz
GOP STRUCTURE
I IP IBP IBBP 422IBBP
GOP Structure
Controls the structure of picture
groups. Affects video encoding
delay
This is an EXPERT Level parameter
To set the GOP structure, use the Î and Í buttons to
navigate choices. The current choice is underlined
.
Press OK to when finished.
2454.25 MHz
GOP LENGTH
6 12 18 24
GOP Length
Set the length of picture groups.
High value, longer group, better
quality, more chance for errors.
This is an EXPERT Level parameter
To set the GOP length, use the Î and Í buttons to
navigate choices. The current choice is underlined
.
Press OK to when finished.
2454.25 MHz
CONSTELLATION
QPSK 16QAM 64QAM
Constellation
Individually modulates each sub-
carrier of the COFDM signal.
QPSK most robust, low data rate,
64QAM least robust, fastest data
rate
This is an EXPERT Level parameter
To set the constellation, use the Î and Í buttons to
navigate choices. The current choice is underlined
.
Press OK to when finished.
2454.25 MHz
GUARD INTERVAL
1/32 1/16 1/8 1/4
Guard Interval
Guards both ends of a symbol.
Higher ratios more robust than
lower ratios
This is an EXPERT Level parameter
To set the Guard Interval use the Î and Í buttons to
navigate choices. The current choice is underlined
.
Press OK to when finished.
2454.25 MHz
CODE RATE
1/2 2/3 3/4 5/6 7/8
Code Rate
Ratio of signal to error correction.
Higher values, faster rate, but more
errors the slower, lower ratios.
This is an EXPERT Level parameter
To set the coder rate, use the Î and Í buttons to
navigate choices. The current choice is underlined.
Press OK to when finished.
2454.25 MHz
Channel Bandwidth
8 7 6 MHz
Channel Bandwidth This is an EXPERT Level parameter
To set the Channel Bandwidth, use the Î and Í
buttons to navigate choices. The current choice is
underlined. Press OK to when finished.
2454.25 MHz
Serial Address
0123456789ABCDEF
Serial Address
Set to 6 in all cases except when
the CCII is being controlled by
something other than the Remote.
This is an EXPERT Level parameter
Set the Serial Address, use the Î and Í buttons to
navigate choices. The current choice is underlined
.
Press OK when finished.