User's Manual

13
What follows is a list of all the FCII menus, with brief description and instructions for use.
Table 6 Normal Mode User Menus
Normal Menu Description How to Use
2454.25 MHz
FREQUENCY
2454.25 MHz
RF Frequency
Displays RF Transmit
Frequency.
To set the RF Frequency press OK. Use the Ï and Ð
buttons to change the value. The Î and Í buttons
move the cursor. Press OK when finished.
2454.25 MHz
RF OUTPUT POWER
off low mid high max
RF Output Power
Boost or Reduce Signal Strength
To set the RF Output Power, press OK. Use the Î and
Í buttons to navigate choices. The current choice is
underlined
. Press OK to when finished.
2454.25 MHz
ROBUSTNESS
low mid high expert
Transmission Robustness
Choose from 3 predefined
settings, or operate in Expert
Mode
Change the Robustness by using the Î and Í buttons
to navigate choices. The current choice is underlined
.
Press OK to set.
Low – Studio,
Mid – News, Sports, Entertainment
High – Mobile/Airborne
Expert – Custom Configuration
2454.25 MHz
RECALL CONFIGURATION
1 2 3 4 5 6 7 8 9 default
Recall Configuration Recall a saved configuration. Press OK to change. Use
the Ï and Ð buttons to change the value. The Î and
Í buttons move the cursor. Press OK when finished.
Default is set by the factory
2454.25 MHz
SAVE CONFIGURATION
1 2 3 4 5 6 7 8 9
Save Configuration
Allows a set of parameters to be
recalled at a later time.
To save a configuration after all parameters have been
set, use the Î and Í buttons to select where to save.
The current choice is underlined
. Press OK to save.
2454.25 MHz
VIDEO INPUT
CVBS YUV SDI ASI
Video Input Mode
YUV is not an option for the
FCII. The FCII will default to
CVBS
To change the Video Input Mode,, use the Î and Í
buttons to navigate choices. The current choice is
underlined
. Press OK to set.
2454.25 MHz
VIDEO MODE
PAL NTSC
Video Mode
Current Video Mode is
underlined
Change the Video Mode from PAL to NTSC. Use the
Î and Í buttons to navigate choices. The current
choice is underlined
. Press OK to set.
2454.25 MHz
AUDIO INPUT
analog SDI
Audio Input Change the Audio Input from analog to SDI.
Use the Î and Í buttons to navigate choices. The
current choice is underlined
. Press OK to set.
2454.25 MHz
AUDIO LEVEL LEFT
-9--------0+++4
Audio Output Level Left
Channel
Displays Audio Output level for
the left channel
Set the Audio Output Level. Use e the Î and Í
buttons to move the cursor. Press OK when finished.
2454.25 MHz
AUDIO LEVEL RIGHT
-9--------0++++4
Audio Output Level Right
Channel
Displays Audio Output level for
the right channel
Set the Audio Output Level. Use e the Î and Í
buttons to move the cursor. Press OK when finished.
2454.25 MHz
DATA PORT BAUD RATE
1.2 4.8 9.6
Auxiliary Data Rate
Configure the Aux. RS232 Port
Baud Rate
To change the baud rate, use the Î and Í buttons to
navigate choices. The current choice is underlined.
Press OK to set.