User's Manual

11
4 Dismounting the Transmitte
r
Before connecting the 28V DC power supply cable, ensure all other equipment,
esp. the antenna, is connected.
4 Dismounting the Transmitter
Before you start dismounting the system make sure it is powered down. Confirm
that the power switch on the control panel is shifted to position “OFF”.
 Unplugging all cables
1. Unplug the power cables of the transmitter and the control panel first
2. Unplug all remaining cables
 Remove the components
3. Release the retaining screws of the transmitter and the control panel
4. Remove the control panel and the transmitter