Installation Instructions

TAA-101/TAA-101S Antenna Actuator Manual | Doc. No. 605169301 Rev. M
Broadcast Microwave Services, Inc. 5
Deployment of the antenna actuator is controlled by the Up/Down Box which also supplies it with power.
There are other deployment control units available as part of an integrated broadcast system (HCP-50,
HCP-100, HCP-50-HCII). Please contact BMS for more information on integrated systems.
2.1 TAA-101 and TAA-101S Components and Accessories
All TAA-101 or TAA-101S assemblies require the antenna actuator, skid mount, and a device for
deployment control. The following table lists the available options and corresponding part numbers.
Table 1. TAA-101 components and accessories
Component Description
Part
Number
Antenna Actuator
Kit, TAA-101-LSM, Left Side Mounting 870169302
Kit, TAA-101-RSM, Right Side Mounting 870169304
TAA-101S-L, Left Side Mounting with RF
cable
800169324
TAA-101S-R, Right Side Mounting with RF
cable
800169323
Deployment
Control
TAA-101-UD Up/Down Box 800195701
Cables
1–7GHz Cable Set 730805000
20” Replacement Cable for TAA-101S
1
610805025
Tools
TAA-101 Installation and Removal Tools Kit 870169391
TAA-101 Installation Tool 800169391
TAA-101 Removal Tool 800169392
1
Replaces the cable from the TAA-101 to the Omni Antenna for both Cable Sets