User's Manual

3 Installing the Transmitter

7. Connect all available video sources to the BNC sockets labelled “CVBS”,

“SDI” and/or “ASI in”

8. Connect all available audio sources to the connector labelled “AUDIO”

9. Connect optional devices to the output labelled “ASI out” if necessary

10. Connect other devices to the sockets labelled “COM” and “ARINC” if

necessary

Note

The ports “COM” and “ARINC” are subject of customised applications. Please

refer to separate instructions.

 Installing the control panel

There are two types of control panels available. One version controls the antenna

actuator, the other does not.

Figure 8: Control panel connectors (with

actuator control)

Figure 9: Control panel connector

(without actuator control)

11. Connect the antenna actuator cable to the socket labelled “ACTUATOR” if

available

12. Connect the transmitter to the socket labelled “COM”

13. Connect the power supply to the socket labelled “POWER” if available

14. Fix the control panel in the cockpit centre console with the four retaining

screws

15. After all connections are made securely, connect the power supply to the

socket labelled “28V DC” transmitter

CT2440ARINC