User's Manual

Chapter 4: Operating the Equipment
Reference Guide: CT2430LD Page 8
March 09
Menu structure
Frequency input
Software version
Display off
Display contrast
Scrambling
Modulation
To get access to a sub menu, use the button 1 or 2.
To exit all sub menus press button 3.
3.2 Frequency input
At the frequency menu the current frequency is displayed.
To change the frequency press button 3 for 3sec.
The flashing cursor displays the current changeable position of the frequency. By the
use of button 1 and 2 the flashing position can be changed, digit for digit. To change
the next position of the frequency use button 3 and afterwards continue as described
before. To save the changed frequency press button 3 after all digits of the frequency
are set. You also leave the frequency setup with this final step.
To exit this submenu, press button 3.
Initialisation
FREQUENCY
2100 MHz
FREQUENCY
loolll
> 2100 MHz <