User's Manual

Chapter 4: Operating the Equipment
Reference Guide: CT2430LD Page 7
March 09
3. Operating the Equipment
3.1 Multifunctional display
During start up, the transmitter is in a self test mode. After the self test, for a short
time the transmitters name is displayed after it changes to the current frequency.
Display during self test
After the self test, the current frequency is displayed.
Current transmit frequency
With its automatic COFDM setup the customer menu is very easy to handle. When
Button 3 is pressed and held for approximately 2sec. the setup menu is accessible.
BMS
CT2430
2100 MHz
Button 1 Button 2 Button 3