User's Manual
Table Of Contents
Chapter 4: Operating the Equipment
3.3 Software Version
In the Sub-menu Software the actual Software version number is shown.
Software
V1.25
To exit this submenu, press button 3.
3.4 Display
In the sub menu ’Display’ you can set the duration for the Display. Here you can set
how long the display has to be on.
DISPLAY OFF
> 000s <
Edit mode is reached by pressing button 3 for 2 seconds. Here, through buttons 1 & 2,
the desired contrast value can be entered. The range is between 0=Dark to 240 sec
ins 15 sec steps.
To exit this submenu, press button 3.
3.5 Contrast
In the sub menu ‘Display Contrast’ an adjustment, relative to the surrounding
brightness, can be made.
Edit mode is reached by pressing button 3 for 2 seconds. Here, through buttons 1 & 2,
the desired contrast value can be entered. The range is between 0= Dark to 127=
Bright. The contrast value at delivery is 031.
Reference Guide: CT2430LD Page 9
March 08