User's Manual

Chapter 4: Operating the Equipment
Menu structure
Reference Guide: CT2430LD Page 8
March 08
Frequency input
Software version
Display off
Display contrast
Scrambling
Modulation
Initialisation
To get access to a sub menu, use the button 1 or 2.
To exit all sub menus press button 3.
3.2 Frequency input
At the frequency menu the current frequency is displayed.
FREQUENCY
2305 MHz
To change the frequency press button 3 for 3sec.
FREQUENCY
loolll
> 2305 MHz <
The flashing cursor displays the current changeable position of the frequency. By the
use of button 1 and 2 the flashing position can be changed, digit for digit. To change
the next position of the frequency use button 3 and afterwards continue as described
before. To save the changed frequency press button 3 after all digits of the frequency
are set. You also leave the frequency setup with this final step.
To exit this submenu, press button 3.