User's Manual

Chapter 4: Operating the Equipment
3. Operating the Equipment
3.1 Multifunctional display
Button 1 Button 2 Button 3
During start up, the transmitter is in a self test mode. After the self test, for a short
time the transmitters name is displayed after it changes to the current frequency.
BMS
CT2430
Display during self test
After the self test, the current frequency is displayed.
2280 MHz
Current transmit frequency
With its automatic COFDM setup the customer menu is very easy to handle. When
Button 3 is pressed and held for approximately 2sec. the setup menu is accessible.
Reference Guide: CT2430LD Page 7
March 08