User's Manual

Chapter 3: Options and Upgrades
Reference Guide: CT2430LD Page 6
March 08
Connecting the 12VDC Supply Voltage
Caution
When using a battery or power pack, make sure that the maximum
supply current is at least 3A and the output voltage matches the
input voltage range of the CT2430LD.
Failure to comply with these requirements may cause fatal
damage to the battery/power pack and/or CT2430LD.
Battery Powered Operation of the CT2430LD
Many types of batteries are available on the market and we tried to support the best
ones.
2.3 Shut-Down
Caution
To shut-down the unit, first disconnect it from the 12VDC supply
voltage.
After disconnection from the supply voltage by removing the battery or disconnecting
the 12VDC supply cable, the other connecting cables can be removed from the unit.