User's Manual
Table Of Contents
Chapter 3: Options and Upgrades
2.2 Connectors
1 Input connector of the CT2430LD Figure
• RF Connector
The RF output signal of the Low-Power Amplifier is fed out at the SMA(f)
connector on top of the unit.
The CT2430 provides a RF output of about 1 W (+30dBm).
Connecting Signal Sources
The Video signal supplied by the camera has to be applied to the PAL/NTSC BNC (f)
connector of the transmitter ( and SDI for CT2430LD-S*).
The Audio signal supplied by the camera has to be applied to the Audio in 5pol Lemo
connector of the transmitter.
Connecting the RF Output
A Omni directional antenna with SMA (m) connector can be directly mount at the RF
out socket.
Reference Guide: CT2430LD Page 5
March 08