User's Manual

Chapter 3: Options and Upgrades
Reference Guide: CT2430LD Page 4
March 08
2. Installing the Equipment
2.1 Safety instructions
Warning
The regulations of VDE0100 must be observed for
installation and operation of the unit.
Caution
Establish all other connections before starting the unit by
connecting it to 12VDC. Essential a valid video signal must be
connected to the desired input before power on the CT2430LD.
When you connect the CT2430LD as described in the following
sections, make sure that the "Caution" instructions given there
are observed.
Make sure that there is sufficient air circulation to ensure
adequate cooling of the unit.
External forced ventilation may be required if the unit is installed
in a rack or cabinet.